Loncat ke daftar isi utama

Bagaimana cara mengidentifikasi dan memilih semua sel yang digabungkan di Excel?

Tahukah Anda cara menemukan dan memilih semua sel yang digabungkan di Excel? Berikut adalah tiga cara rumit yang keren untuk mengidentifikasi dan memilih semua sel yang digabungkan dalam suatu pilihan atau rentang di Excel dengan cepat.

doc pilih sel gabungan 4

Identifikasi dan pilih semua sel yang digabungkan dengan perintah Find

Pilih dan hitung dengan cepat semua sel yang digabungkan dengan Kutools for Excel

Identifikasi semua sel yang digabungkan dengan kode VBA


Identifikasi dan pilih semua sel yang digabungkan dengan perintah Find

Anda dapat mengidentifikasi dan memilih semua sel yang digabungkan di lembar kerja aktif dengan Menemukan perintah dengan langkah-langkah berikut:

1. klik Beranda > Temukan & Pilih > Menemukan untuk membuka Cari dan Ganti kotak dialog. Anda juga dapat membuka file Cari dan Ganti kotak dialog dengan menekan Ctrl + F kunci.

2. klik dibentuk di kotak dialog, (Jika Anda tidak dapat menemukan dibentuk tombol, silakan klik Opsi tombol untuk memperluas dialog.) lihat tangkapan layar:

doc pilih sel gabungan 1

3. Dalam bermunculan Temukan Format kotak dialog, centang hanya Gabungkan Sel pilihan dalam Kontrol teks Bagian bawah Strategi tab, dan klik OK.

doc pilih sel gabungan 2

4. Sekarang Anda kembali ke Cari dan Ganti kotak dialog, klik Temukan semua tombol. Semua sel yang digabungkan terdaftar di bagian bawah kotak dialog ini. Pilih semua hasil pencarian dengan menahan perubahan kunci.

Sekarang semua sel yang digabungkan di lembar aktif dipilih saat Anda memilih semua hasil pencarian. Lihat tangkapan layar:

doc pilih sel gabungan 3

Tip: Jika Anda hanya ingin mengidentifikasi, menemukan, dan memilih sel yang digabungkan dalam sebuah pilihan, Anda harus memilih rentangnya terlebih dahulu.


Pilih dan hitung semua sel yang digabungkan dengan Kutools for Excel

Kutools untuk Excel's Pilih Sel yang Digabung alat akan membantu Anda mengidentifikasi, menemukan dan memilih semua sel yang digabungkan dalam seleksi hanya dengan satu klik.

Kutools untuk Excel : dengan lebih dari 300 add-in Excel yang praktis, gratis untuk dicoba tanpa batasan dalam 30 hari. 

Setelah menginstal Kutools untuk Excel, lakukan hal berikut :( Unduh Gratis Kutools untuk Excel Sekarang! )

1. Pilih rentang data yang ingin Anda pilih sel yang digabungkan.

2. Klik Kutools > Pilih > Pilih Sel yang Digabung, lihat tangkapan layar:

3. Dan semua sel yang digabungkan dalam pemilihan telah dipilih sekaligus, dan jumlah sel yang digabungkan juga dihitung, lihat tangkapan layar:

doc pilih sel gabungan 7

jenis: Untuk menggunakan fitur ini, Anda harus menginstal Kutools untuk Excel pertama, silakan klik untuk mengunduh dan dapatkan uji coba gratis 30 hari sekarang.

Identifikasi semua sel yang digabungkan dengan kode VBA

VBA 1: Identifikasi dan sorot semua sel yang digabungkan

1. Tahan ALT + F11 kunci, dan itu membuka Microsoft Visual Basic untuk Aplikasi jendela.

2. Klik Menyisipkan > Modul, dan tempelkan makro berikut di file Modul Jendela.

Sub FindMergedcells()
'updateby Extendoffice
Dim x As Range
For Each x In ActiveSheet.UsedRange
If x.MergeCells Then
x.Interior.ColorIndex = 8
End If
Next
End Sub

3. Tap F5 kunci untuk menjalankan makro ini. Semua sel yang digabungkan dalam lembar kerja aktif diidentifikasi dan disorot, lihat tangkapan layar:

doc pilih sel gabungan 4

VBA 2: Identifikasi dan daftarkan semua sel yang digabungkan

1. Tahan ALT + F11 kunci, dan itu membuka Microsoft Visual Basic untuk Aplikasi jendela.

2. Klik MenyisipkanModul, dan tempelkan makro berikut di file Modul Jendela.

Sub ListMergedcells()
'updateby Extendoffice
Dim x As Range
Dim sMsg As String
sMsg = ""
For Each x In ActiveSheet.UsedRange
If x.MergeCells Then
If sMsg = "" Then
sMsg = "Merged cells:" & vbCr
End If
sMsg = sMsg & Replace(x.Address, "$", "") & vbCr
End If
Next
If sMsg = "" Then
sMsg = "No merged cells."
End If
MsgBox sMsg
End Sub

3. Tap F5 kunci untuk menjalankan makro ini, semua sel yang digabungkan terdaftar dalam kotak dialog yang muncul. Lihat tangkapan layar:

doc pilih sel gabungan 5

Comments (12)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Is it possible to identify the first and the last column number of the merged range in vba?
This comment was minimized by the moderator on the site
I require code to list merged ranges in a worksheet where the merged ranges are individually entered in cells starting at "A1" thus a3:c3 b2:b7 etc...........
This comment was minimized by the moderator on the site
well done You are a star... Thanks :-)
This comment was minimized by the moderator on the site
Very Nice thanks a lot
This comment was minimized by the moderator on the site
Actually I just about went mental trying to fix this in a spreadsheet. In desperation I selected all the cells (control A) clicked "merge and centre" and presto! it was fixed.
This comment was minimized by the moderator on the site
Probably obvious, but: In my last comment I should have made it clear you need to "select" each column, in turn, before scanning visually. Though really you only need to scan certain columns, I think: To the best of my knowledge, it's only cells containing text that will occasionally annex an adjoining cell, and numeric-only columns can be trusted not to do so. Even with text columns, you should be OK just checking every other column, because if any cell in the selected column has been involved in an annexation (to the right or from the left), that will show up in a visual scan of the selected column. I have never seen annexations occurring vertically, only horizontally. But if such a thing happened (a vertical annexation), you could try the same technique going row by row instead of column by column. The procedure is tedious, definitely. A royal pain, in fact. But if you have to sort your data, and Microsoft refuses to fix their bug, it's the only recourse I know of. Nowadays I try to remember to put a space character into each cell of the area I expect to use, prior to entering any other data, thus ensuring no annexations will occur.
This comment was minimized by the moderator on the site
thank u this help me to find merged cell in my excel
This comment was minimized by the moderator on the site
... so in the spreadsheet you spoke of, which was not set up with those protective space characters, my approach would be to visually scan each column which lies just to the right of any text column; and immediately after identifying & unmerging each occurrence, I would put a space character in the empty cell so the merging will not recur. Probably there's a VBA or other coding means to accomplish this much more efficiently. Anyone???
This comment was minimized by the moderator on the site
Actually I think this can be avoided entirely, if you remember to do so before entering data into any text column. In my experience the only time cells are clandestinely merged is when an empty cell is to the right of a text cell, where normally the display of the text would be extended to take advantage of the otherwise unused display space provided by the empty cell. Therefore, when initially setting up your spreadsheet, before entering any data, you can fill every "susceptible" cell with a single space鈥攁s many rows down as you expect to have data to fill. That space will be honored like any other text, and the cell to the left will not annex it.
This comment was minimized by the moderator on the site
If your spreadsheet is small (or you are desperate enough), the best way I've found is to select one column at a time and scroll all the way down to the bottom. Any merged cells will be obvious, because the entire merged cell is highlighted. You can then fix each one, one by one. But you risk wasting a lot of time doing this, since Excel continues to merge cells "behind your back" whenever it feels like doing so.* Therefore, cells you have just unmerged (or others which hadn't been merged before) may become merged while you believe you are finishing the unmerging process. I tried to find a way to completely disable the merging of cells but haven't found it. Better, of course, would be some way to keep Excel from engaging in this psychopathic behavior! *Yesterday, desperate, I did try to unmerge cells in a not-so-large spreadsheet (22 columns and fewer than 1,000 rows). Each time I thought I had finished and tried to sort, I got that same message. So then I tried another way to identify where the merged cells were鈥攕electing a screenful of rows at a time and trying the sort on just those rows. Each time I got the message, I would try half the screenful at a time (etc.) until I identified the row(s) with merged cells. By going through the entire spreadsheet until each screenful had been successfully sorted, I figured the entire sort should work. But, NOT. Excel had been gleefully merging cells I had just unmerged. Please, someone, post a solution!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
Rate this post:
0   Characters
Suggested Locations