Loncat ke daftar isi utama

Bagaimana cara memberi peringkat nomor rentang secara unik tanpa duplikat di Excel?

Di Microsoft Excel, fungsi peringkat normal memberi nomor duplikat peringkat yang sama. Misalnya, jika angka 100 muncul dua kali dalam rentang yang dipilih, dan angka pertama 100 menempati peringkat 1, angka terakhir 100 juga akan menempati peringkat 1, dan ini akan melewatkan beberapa angka. Namun, terkadang, Anda perlu memberi peringkat nilai-nilai ini secara unik seperti yang ditunjukkan tangkapan layar berikut. Untuk detail lebih lanjut tentang peringkat unik, lakukan seperti tutorial berikut yang ditunjukkan langkah demi langkah.

Nomor rentang peringkat secara unik dalam urutan menurun

Nomor rentang peringkat secara unik dalam urutan menaik

Nomor rentang peringkat secara unik dalam urutan menurun

Di bagian ini, kami akan menunjukkan kepada Anda cara memberi peringkat nomor rentang secara unik dalam urutan menurun.

Ambil data screenshot di bawah ini sebagai contoh, Anda dapat melihat ada beberapa nomor duplikat di antara rentang A2: A11.

1. Pilih B2, salin dan tempel rumus =RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A2,A2)-1 ke dalam Formula Bar, lalu tekan tombol Enter kunci. Lihat tangkapan layar:

2. Kemudian nomor peringkat ditampilkan di sel B2. Pilih sel B2 dan letakkan kursor di sudut kanan bawah, saat tanda silang hitam kecil muncul, seret ke bawah ke sel B11. Kemudian peringkat unik berhasil. Lihat tangkapan layar:

Nomor rentang peringkat secara unik dalam urutan menaik

Jika Anda ingin membuat peringkat nomor rentang secara unik dalam urutan naik, lakukan hal berikut.

1. Pilih sel B2, salin dan tempel rumus =RANK(A2,$A$2:$A$11,1)+COUNTIF($A$2:A2,A2)-1 ke dalam Formula Bar, lalu tekan tombol Enter kunci. Kemudian nomor peringkat pertama ditampilkan di sel B2.

2. Pilih sel B2, seret gagang isian ke bawah ke sel B11, lalu peringkat unik selesai.

Alat Produktivitas Kantor Terbaik

🤖 Kutools AI Ajudan: Merevolusi analisis data berdasarkan: Eksekusi Cerdas   |  Hasilkan Kode  |  Buat Rumus Khusus  |  Analisis Data dan Hasilkan Grafik  |  Aktifkan Fungsi Kutools...
Fitur Populer: Temukan, Sorot, atau Identifikasi Duplikat   |  Hapus Baris Kosong   |  Gabungkan Kolom atau Sel tanpa Kehilangan Data   |   Putaran tanpa Formula ...
Pencarian Super: VLookup Beberapa Kriteria  |   VLookup Nilai Berganda  |   VLookup di Beberapa Lembar   |   Pencarian Fuzzy ....
Daftar Drop-down Lanjutan: Buat Daftar Drop Down dengan Cepat   |  Daftar Drop Down yang Bergantung   |  Multi-pilih Drop Down List ....
Manajer Kolom: Tambahkan Jumlah Kolom Tertentu  |  Pindahkan Kolom  |  Alihkan Status Visibilitas Kolom Tersembunyi  |  Bandingkan Rentang & Kolom ...
Fitur Unggulan: Fokus Kisi   |  Tampilan Desain   |   Bar Formula Besar   |  Manajer Buku Kerja & Lembar   |  Perpustakaan Sumberdaya (Teks otomatis)   |  Pemetik tanggal   |  Gabungkan Lembar Kerja   |  Enkripsi/Dekripsi Sel   |  Kirim Email berdasarkan Daftar   |  Filter Super   |   Filter Khusus (filter tebal/miring/coret...) ...
15 Perangkat Teratas:  12 Teks Tools (Tambahkan Teks, Hapus Karakter, ...)   |   50 + Grafik jenis (Gantt Chart, ...)   |   40+ Praktis Rumus (Hitung usia berdasarkan ulang tahun, ...)   |   19 Insersi Tools (Masukkan Kode QR, Sisipkan Gambar dari Jalur, ...)   |   12 Konversi Tools (Angka ke Kata, Konversi Mata Uang, ...)   |   7 Gabungkan & Pisahkan Tools (Lanjutan Gabungkan Baris, Pisahkan Sel, ...)   |   ... dan banyak lagi

Tingkatkan Keterampilan Excel Anda dengan Kutools for Excel, dan Rasakan Efisiensi yang Belum Pernah Ada Sebelumnya. Kutools for Excel Menawarkan Lebih dari 300 Fitur Lanjutan untuk Meningkatkan Produktivitas dan Menghemat Waktu.  Klik Di Sini untuk Mendapatkan Fitur yang Paling Anda Butuhkan...

Deskripsi Produk

Tab Office Membawa antarmuka Tab ke Office, dan Membuat Pekerjaan Anda Jauh Lebih Mudah

  • Aktifkan pengeditan dan pembacaan tab di Word, Excel, PowerPoint, Publisher, Access, Visio, dan Project.
  • Buka dan buat banyak dokumen di tab baru di jendela yang sama, bukan di jendela baru.
  • Meningkatkan produktivitas Anda sebesar 50%, dan mengurangi ratusan klik mouse untuk Anda setiap hari!
Comments (27)
No ratings yet. Be the first to rate!
iben
iben
This comment was minimized by the moderator on the site
Hi every one, i have this formula
=RIJEN($H$2:$H$7)-SOMPRODUCT(--(H2-E2/10000>$H$2:$H$7-$E$2:$E$7/10000))

it determines the rank of a value in a column. if there is an equal value, the rank is determined by a 2nd value in another column. Now the problem is when negative numbers occur in the 2nd column, the rank is determined inversely -1 gets a lower rank than 0

can anyone adjust this formula or create a new one for excel 2007 dutch version
Reply
0
0
Iben
Iben
This comment was minimized by the moderator on the site
Hi every one, i have this formula
=RIJEN($H$2:$H$7)-SOMPRODUCT(--(H2-E2/10000>$H$2:$H$7-$E$2:$E$7/10000))

it determines the rank of a value in a column. if there is an equal value, the rank is determined by a 2nd value in another column. Now the problem is when negative numbers occur in the 2nd column, the rank is determined inversely -1 gets a lower rank than 0

can anyone adjust this formula or create a new one for excel 2007 dutch version

thanks
Reply
0
0
JustZ52
JustZ52
This comment was minimized by the moderator on the site
Hey so I just worked on this formula for the past 45 minutes. The above formula is wrong, the output does provide duplicates but that is only because the countif range is not accounting for the entire range.

Above the descending formula is: =RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A2,A2)-1

The bold/underlined A2 cell should be equal to the ending of the range which is A11. Which would make correct forumla stance:

=round(RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A7,A2)-1

For visuals, on my sheet I created a leader tracking board with the following formula and I got no duplicates see below 2 images with duplicate numbers but different ranking levels:


My Descending formula: =round(RANK(D7,$D$7:$BY$7)+countif($D$7:$BY$7,D7)-1)
Key Notes:
- My range is locked
- D7 is the start of my range and BY7 is the end of my range
- I have added the round formula to account for any decimals
- the (-1) will automatically subtract from the previous ranking.
View Attachments (2 / 5)
Reply
Report
0
0
crystal
crystal     JustZ52
This comment was minimized by the moderator on the site
Hi Zoe,
Thank you for your feedback. I will check the formula and make the changes.
Reply
Report
0
0
Rofijul Islam
Rofijul Islam
This comment was minimized by the moderator on the site
It's very helpful content. Thank You so much.
Reply
0
0
Sofi
Sofi
This comment was minimized by the moderator on the site
Thank you for the solution! Works perfectly!
Reply
0
0
Rick
Rick
This comment was minimized by the moderator on the site
This tip was PERFECT in solving my sorting issue! Thanks very much!!!
Reply
0
0
Brett
Brett
This comment was minimized by the moderator on the site
I still have duplicate rankings. Before I used COUNTIF the rankings were 4 for both, now they are both ranked 5 with COUNTIF BUT in my chart, it will only list one of the items twice instead of listing both items. Here is my formula: =RANK(V3,V$3:V$30, 1)+COUNTIF(V$3:V$30:V3,V3)-1
In the ranking chart it displays rank 4 as team 1 and rank 5 as team 1 since team 1 and team 2 have the same rank, team 2 is not listed. Here is the formula for those cells:=INDEX($L$3:$L$30,MATCH(SMALL($V$3:$V$30,Y3),$V$3:$V$30,0))
How do I make sure teams that are tied do not get left off list?


Reply
0
0
Ron
Ron
This comment was minimized by the moderator on the site
Formulas for unique ascending and descending are identical. Ascending should be: =RANK(A2,$A$2:$A$11,1)+COUNTIF(A2:$A$2,A2)-1.
Reply
0
0
vikas
vikas
This comment was minimized by the moderator on the site
if you see the below ranking, where the duplicate numbers found, number is missing.
Exmples
After 23 it goes to 25, after 29 it goes to 30, Formula miss the next number like - 24 & 29

Score Rank

4661 21

4650 22

4648 23

4645 25

4645 25

4644 26

4629 27

4626 28

4595 30

4595 30

4578 31

4438 32
Reply
0
0
Sifa
Sifa     vikas
This comment was minimized by the moderator on the site
What's the formula for this ranking where it combines same values into one ranking???
Reply
0
0
Musawir
Musawir
This comment was minimized by the moderator on the site
Hi, This formula just ranks all numbers in ascending/descending order and doesn't combine the duplicates into one rank. How do I combine the ranking for duplicates, for example two duplicate 100s to be combined and both ranked as 1, 3 duplicate 90s to be combined and ranked as 2, 2 duplicate 80s ranked as 3, etc.? In your example of total 10 students I want a formula that will rank the two 100s as 1, rank the two 90s as 2, rank the two 80s as 3, etc. Please help. Thanks
Reply
0
0
Alex
Alex     Musawir
This comment was minimized by the moderator on the site
if you do want this kind of ranking, what I would do is copy the whole list somewhere else, then use remove duplicates in the Data menu to leave only the individual values. rank these individual scores using a standard RANK formula and then use a simple VLOOKUP formula to return the value against the score in the full list.

this will show the values the way you want above.
Reply
0
0
Alex
Alex     Musawir
This comment was minimized by the moderator on the site
Why do you need to do this? a standard RANK formula will rank these examples as 1, 1, 3, 3, 5, 5. this is a much more usual way of ranking as if there are 2 first places the next in line would usually logically be 3rd not 2nd.
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations